Menu
Your Cart

12V 12.5 Amp 105 Watts Switching Power Supply 5.00012

12V 12.5 Amp 105 Watts Switching Power Supply 5.00012
New
12V 12.5 Amp 105 Watts Switching Power Supply 5.00012
  • Stock: In Stock
  • Model: 5.00012
  • Weight: 5.00lb
  • Dimensions: 20.00in x 10.00in x 8.00in
  • SKU: 5.00012
  • UPC: 5.00012
  • EAN: 5.00012
  • JAN: 5.00012
  • ISBN: 5.00012
  • MPN: 5.00012
  • Location: 12V 12.5 Amp 105 Watts Switching Power Supply
190 samples sold
Product Views: 7297
$89.90
10 or more $80.91
26 or more $76.42
50 or more $71.92

12V 12.5 Amp 105 Watts Switching Power Supply

• AC Input Range Selectable By Switch
• Protections: Short Circuit / Overload / Over Voltage
• Cooling By Free Air Convection
• Led Indicator For Power On
• 100% Full Load Burn-In Test
• High Efficiency, Long Life And High Reliability

 

MODEL Item Number 5.00012
OUTPUT DC VOLTAGE 12V
RATED CURRENT 12.5A  
CURRENT RANGE 0- 30A 0-26A 0- 20A 0-16.7A 0-12.5A 0-10A 0- 6.5A 0- 3.3A
RATED POWER 99W 130W 150W 150W 150W 150W 156W 158.4W
RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p 200m Vp-p
VOLTAGE ADJ. RANGE 3.2 - 3.5V 4.75 - 5.5V 7.13 - 8.3V 8.55 - 9.9V 11.4 -13.5V 14.25 -16.5V 22.8 - 27.6V 45.6 - 52.8V
VOLTAGE TOLERANCE Note.3 ±3.0% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION Note.4 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION Note.5 ±2.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
SETUP, RISE TIME Note.7 800ms, 20ms/230VAC               1200ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.) 24ms/230VAC         20ms/115VAC at full load
INPUT VOLTAGE RANGE 90 - 132VAC I 180 - 264VAC selected by switch 254 - 373VDC
FREQUENCY RANGE 47 - 63Hz
EFFICIENCY (Typ.)
73%
78%
80%
83%
83%
83%
86%
86%
AC CURRENT (Typ.) 3A/115VAC                2A/230VAC
INRUSH CURRENT (Typ.) COLD START 45A/230VAC
LEAKAGE CURRENT <2mA / 240VAC
PROTECTION OVERLOAD 110 - 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
3.8 - 4.65V
5.75 - 6.75V
8.6 -10.1V
10.4 -12.2V
13.8 -16.2V
17.25 - 20.25~
27.6 - 32.4V
55.2 - 62.4V
Protection type: Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT WORKING TEMP. -20 - +60°C (Refer to output load derating curve)
WORKING HUMIDITY 20 - 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 - +85°C, 10 - 95% RH
TEMP. COEFFICIENT ±0.03%tC (0 - 50°C)
VIBRATION 10 - 500Hz, 2G 1Omin./1 cycle, period for 60min. each along X, Y, Zaxes
SAFETY & EMC (Note 6) SAFETY STANDARDS UL60950-1, TUV EN60950-1 ,GB4943 approved
WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 70% RH
EMI CONDUCTION &RADIATION Compliance to EN55022 (CISPR22) Class B,GB9254 CLASS B
HARMONIC CURRENT Compliance to EN61 000-3-2,-3,GB17625.1
EMS IMMUNITY Compliance to EN61 000-4-2,3,4, 5, 6, 8,11, ENV50204, EN55024, EN61 000-6-1, heavy industry level, criteria A
OTHERS MTBF 433.3Khrs min. MIL-HDBK-217F (25°C)
DIMENSION 199*98*38mm (L*W*H)
PACKING 0.7Kg; 20pcs/15Kg/O.72CUFT
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.

Write a review

Notification Module
This is the sticky Notification module. You can use it for any sticky messages such as cookie notices or special promotions, etc.